Spider PRO 720W V2.0 - LED grow light with LCD screen - Growth - Flowering
Introducing the Spider PRO 720 W V2.0
Discover the new generation Spider PRO 720W V2.0 horticultural LED lighting. Thanks to its interchangeable LED bars , its integrated LCD touch screen and its 4 separately controllable light spectra , this revolutionary lighting allows you precise and complete management of your crop, without any external controller!
Optimize your results from growth to flowering , with an adjustable spectrum adapted to each phase of development.
✅ Also available in 320W / 510W and 720W
MAX growing area : 180 cm x 180 cm
Optimal growing area : 150 cm x 150 cm
Minimum cultivation area : 120 cm x 120 cm
Technical Analysis : Spider PRO 720W
The mappings show central values between 836 and 1029 µmol/m²/s at 60 cm , and 1165 to 1487 µmol/m²/s at 30 cm .
For comparison, agronomic requirements are typically around 400–600 µmol/m²/s in vegetative growth and 700–900 µmol/m²/s in flowering , with an exploitation limit without CO₂ close to 1,000–1,200 µmol/m²/s .
The Spider PRO 720W therefore delivers up to 2.1 times the optimal flowering intensity , which allows the power to be reduced by 35 to 40% via the 4 channels while maintaining a fully usable photosynthetic level.
The PPFDmin / PPFDmoyen ratio reaches 0.836 at 30 cm and 0.895 at 60 cm , i.e. 83.6 to 89.5% actual uniformity over the cultivation area.
In practice, this means that the difference in light exposure between the center and the edges remains less than 15% , compared to 40 to 50% variation on many HPS or LED systems with a central hot spot.
This homogeneity simultaneously avoids photoinhibition (>1,300 µmol/m²/s) at the center and under-exposure (at the periphery, ensuring consistent CO₂ assimilation for all plants.
The DLI is calculated according to: PPFD × hours × 3.6 / 1,000,000 .
At 60 cm in flowering (12 h) with an average PPFD of 1200 µmol/m²/s , the DLI reaches ≈ 51.8 mol/m²/day , while the optimal flowering range is around 30–35 mol/m²/day .
This represents an excess capacity of +48 to +73% , allowing a power reduction of approximately 250W while remaining in the physiologically optimal zone.
Growing at 30 cm over 18 h with 900 µmol/m²/s , the DLI reaches ≈ 58 mol/m²/day for an actual need of 15–25 mol/m²/day , allowing either a sharp decrease in intensity, or a reduction in cycle time that can exceed 30% .
The Spider PRO 720W displays a measured efficiency of 2.9 µmol/J , i.e. a total flux of 2,088 µmol/s for 720 W consumed.
At equal power, a standard LED at 2.3 µmol/J delivers approximately 1,656 µmol/s , or 21% fewer photons .
Compared to a 1000W HPS (~ 1800 µmol/s for 1000 W ), the Spider PRO consumes 280 W less while providing +16% photon flux , which translates into a reduction of approximately 1200 kWh over 5 years at 12 h/day .
Without CO₂ enrichment, photosynthetic saturation occurs around 1000–1200 µmol/m²/s .
Beyond this point, the assimilation curve becomes almost flat: the additional photons no longer increase biomass proportionally.
With measured peaks of up to 1,487 µmol/m²/s , the Spider PRO 720W therefore allows either:
a reduction in intensity to 65–70% to maintain optimal DLI with ≈ 250 W saved ,
i.e., full power operation under CO₂ (~1200 ppm) , where the light saturation threshold rises to around 1800–2000 µmol/m²/s ,
either a strategy of shortened cycles (high intensity + reduced duration) increasing the number of annual harvests.
The central peak measured at 1,487 µmol/m²/s and the distribution over a surface of 1.44 m² (120×120 cm) confirm by spatial integration an overall flux consistent with the announced value of 2,088 µmol/s .
No peripheral PPFD collapse is observed, which validates both the LED bar density , the angular distribution and the absence of significant spectral drift.
The measurements thus confirm that the announced power is actually converted into usable photons, and not lost as heat or coverage imbalance.
Take control of your spectrum
The integrated LCD screen guarantees a smooth, precise and optimized growing experience , offering you professional results without extra effort or hidden costs.
Integrated Touchscreen LCD: Autonomous, intuitive and ultra-precise management
With its new integrated touchscreen LCD , the Spider PRO 720W V2.0 offers a unique lighting management experience for your plants. Forget the constraints of an external console: you can now fully control your LED grow light with absolute precision, right from your fingertips.
| Criteria | 🔥 Spider PRO 720W V2.0 | 🌈 Standard LED 720W | 💡 HPS 1000W |
|---|---|---|---|
| Power consumption | 720W (adjustable) | 720W (fixed) | 1000W |
| Total PPF (µmol/s) | 2088 µmol/s | 1700 µmol/s | 1800 µmol/s |
| Luminous efficacy (µmol/J) | 2.9 µmol/J | 2.3 µmol/J | 1.8 µmol/J |
| Light spectrum | 🔵🌺🟣🔴 4 channels: 5000K, 3000K+660nm, UV, IR | 🌈 Fixed spectrum (Full Spectrum) | 🟡 Yellow/orange spectrum dominated |
| Customization | ✅ LCD touchscreen, individual spectrum control | ❌ No control | ❌ No control |
| Lifetime | 🔄 60,000 hours (interchangeable bars) | 🟡 50,000 hours | ⚠️ 12,000 hours (annual replacement required) |
| Thermal management | 🌬️ Optimized heat dissipation, low heat release | ⚠️ Moderate heating | 🔥 High heat output, requires a powerful extractor fan |
| Day/night transition (Emerson effect) | ✅ 730nm infrared for faster flowering | ❌ Not available | ❌ Not available |
| Optimizing harvests | 🔥 +25% terpenes and resin thanks to UV | ⚠️ Standard results | ⚠️ Good production but suboptimal heat and spectrum |
| Energy savings | ⚡ Up to 40% savings compared to a 1000W HPS | ⚡ -25% compared to a 1000W HPS | ⚠️ High power consumption (1000W) |
Precise control of
4 light channels
Precisely select each spectrum (Growth, Flowering, UV, IR) in just a few steps. Adjust their light intensity minute by minute for maximum optimization at every stage of your plants' cycle.
Simple and customized growing program
Program the on/off times directly according to the specific needs of your crop, without any external controllers. Simplify your setup and reduce your equipment!
Smart energy savings
Easily manage overall power and activate UV and IR spectra only when your plants need them, thus limiting unnecessary energy expenditure.
Maximum user comfort
A simple and intuitive interface accessible to all, from beginners to experienced growers, for immediate and easy handling.
Become a CannaLED reseller
Join the network of professionals who trust CannaLED , experts in LED horticultural lighting in Europe since 2010. Benefit from advantageous prices , immediately available stock and 24-hour shipping for all in-stock products.
As a reseller, you will benefit from dedicated support and privileged access to innovative and high-performance LED solutions, designed to optimize plant growth while reducing energy consumption.
Low minimum order - Fast delivery - Mixing available
📩 Contact us now via the form on the right and discover how to integrate CannaLED solutions into your offer.
Technical specifications
- Power: 720 Watts
- PPFD: Up to 2088 umol/s - EX: HPS 600W = 1100 UMOL/S
- Exceptional energy efficiency: 2.9 µmol/J
- LEDs: Samsung (White TOP BIN), Osram (Deep Red 660nm), UV 395nm and IR 730nm
- Optimal coverage: from 120x120cm up to 150x150cm
- Integrated touchscreen LCD: simplified and independent settings management
- Interchangeable LED bars: easy repair and product upgrades at a lower cost
Infrared Spectrum
730nm
UV spectrum
395nm
Flowering booster
660nm + 3000K
Full spectrum
4950K
Spider 720W PRO V2.0
📦 Package contents
Your Spider PRO 720W V2.0 comes complete and ready to use:
- 1x High-performance LED power supply with LCD screen
- 6x 720W light bars
- 1x IEC (EU) power cable
- 1x RJ45 control cable (optional control)
- 2x secure metal suspension cables
- 2x precision adjustment pulleys (68 kg capacity)
Lighting size:
110cm x 110cm x 140mm
Weight of the lighting:
13.5 kg
A full spectrum UV + IF
Thanks to infrared and ultraviolet light, your plants could unlock their full potential to reduce disease, trigger photosynthesis, and grow in size while strengthening them.
Unlike our competitors, these additional wavelengths are included directly. Since this extra spectrum is only needed in the later stages of flowering, we've placed it on a separate, controlled channel so you can decide when to use it . This eliminates energy waste and prevents unwanted stretching during the early stages of plant growth.
The ultimate phytobiological lighting
After months of work on the benefits of the light spectrum on plants, our teams specializing in photosynthetic research have arrived at the optimal spectrum dedicated to growth and flowering.
No photon loss; all the watts consumed by the Spider PRO 720W are converted into energy that will be used to fix CO2 into sucrose.
Thanks to our new lighting, you can perfectly control one of the 9 cardinal parameters to achieve the best possible result.
Growth chart
| Week | Phase | Photoperiod | 5000K (Growth) | 3000K + 660nm (Blooming) | UV 395nm (Ultraviolet) | IR 730nm (Infrared) |
|---|---|---|---|---|---|---|
| 1 | 🌱 Growth | 6 PM ON / 6 AM OFF | 50% | 0% | 0% | 15-30 minutes after ignition |
| 2 | 75% | 15-30 minutes after ignition | ||||
| 3 | 100% | 15-30 minutes after ignition | ||||
| 4 | 100% | 15-30 minutes after ignition |
🌱 Why these precise adjustments during the growth phase?
During the first few weeks, your plants are in a crucial period where they establish their root structure and develop their foliage. Here's why every setting is important:
By following these recommendations, you provide your plants with the ideal conditions for healthy, uniform and optimized growth, allowing them to fully express their genetic potential in subsequent phases.
🔆 Spectrum 5000K : Gradual increase
- Week 1 (50%): Allows young plants and cuttings to gently acclimate to their light environment, avoiding any stress related to too high an intensity from the start.
- Week 2 (75%): The intensity gradually increases to stimulate more robust leaf and root development.
- Weeks 3 and 4 (100%): At full power, the 5000K spectrum ensures vigorous and compact vegetative growth, ideally preparing plants for flowering.
🔴 Flowering Spectrum (3000K + 660nm) disabled (0%):
- This spectrum is specifically designed to stimulate flowering; its use in the vegetative phase is unnecessary and could even induce undesirable growth (premature stretching).
🟣 UV (395nm) deactivated (0%):
- The UV spectrum is only beneficial at the end of flowering to increase terpene and resin production. Its use during the vegetative stage would be premature and could generate unnecessary stress on young plants.
🌙 IR (730nm): 15-30 min after ignition
- Using IR at the beginning of the light period allows for a natural simulation of sunrise, promoting a smooth transition to the active photoperiod, thus reducing daily stress.
- At the end of growth (week 4), this subtly prepares the plants for the transition to the flowering phase, facilitating a quick and efficient transition to the next period.
Flowering chart
| Week | Phase | Photoperiod | 5000K (Growth) | 3000K + 660nm (Blooming) | UV 395nm (Ultraviolet) | IR 730nm (Infrared) |
|---|---|---|---|---|---|---|
| 5 | 🌺 Blooming | 12pm ON / 12pm OFF | 100% | 25% | 0% | 15-30 minutes after switching on + before switching off |
| 6 | 50% | 0% | ||||
| 7 | 75% | 0% | ||||
| 8 | 100% | 2 hours/day (mid-photoperiod) | ||||
| 9 | 100% | 2 hours/day (mid-photoperiod) | ||||
| 10 | 100% | 4 hours/day (mid-photoperiod) | ||||
| 11 | 75% | 4 hours/day (mid-photoperiod) | ||||
| 12 | 50% | 6 hours/day (mid-photoperiod) |
🌺 Why these precise settings during the flowering phase?
During flowering, your plants enter a crucial stage where each wavelength of light directly influences the quality and quantity of your harvest. This is why we recommend this specific program with the Spider PRO 720W V2.0:
🔆 Spectrum 5000K : Maintained at 100% until week 8
- Maintaining the growth spectrum (5000K) during the first weeks of flowering allows your plants to retain vegetative vigor essential for optimal floral development.
- This combination of cool and warm spectra at the beginning of flowering facilitates the gradual transition to the full flowering stage, ensuring robustness and leaf health before total maturation.
🔴 Flowering Spectrum (3000K + 660nm) gradual increase:
Weeks 5 to 8: gradual increase (25% → 100%)
- The intensity of the deep red spectrum is gradually increased (25%, 50%, 75%, then 100%) in order to naturally reproduce the seasonal change and thus reduce any stress related to a sudden intensity.
- This gradual rise promotes harmonious flower development, limiting the risks of stretching or excessive light stress at the beginning of flowering.
- From week 8 (100%), the intense red spectrum and warm white maximize size, density and floral production.
🟣 UV (395nm) targeted use at the end of flowering:
- The precise addition of UV in the middle to end of the photoperiod (2 hours then up to 4 hours per day) during the last few weeks strongly stimulates the production of terpenes and cannabinoids, thus increasing the aromatic quality and potency of your final harvest.
- Targeted and limited exposure avoids excessive stress while fully exploiting the scientifically documented benefits of UV radiation.
🌙 IR (730nm): 15-30 min after ignition
15 to 30 minutes after switching on and before daily switching off :
- The infrared spectrum (far red) accelerates the day/night transition, shortening the time plants go to sleep (Emerson effect).
- This method effectively simulates natural sunrise and sunset conditions, optimizing plant physiology, reducing stress, and subtly accelerating flowering.
Available in 3 formats
Spider PRO 320W
€799.00
| Power consumption | |
|---|---|
| Cultivation area | |
| Recommended distance from the canopy | |
| Thermal management | Passive cooling |
| Temp working environment | -25 to +45°C |
| Lifetime | 70 000h |
| Manufacturer's warranty |
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
Your review cannot be sent